2013 Boat Show Debuts

Believe it or not, 2013 is almost here and with the new year comes a new season of boat shows. Starting January 4, we’ll be attending shows all over America – in fact, we’ve got 49 events lined up. All our stops, hours, and show information can be found on our events page.

What’s New

25 SES Entertainer
Our newest wave of SES pontoon designs is a little different than those of our traditional boats. The most recent floorplan offers a bar group, refrigerator, built in grill, and corean counter tops, which altogether resemble a bar or kitchen.

Continue reading “2013 Boat Show Debuts”

If Boaters Were Donors…

We recently came across this infographic about 2012 presidential campaign spending as well as the costs of other campaigns in history. Would you believe $2 billion was spent on both Obama and Romney? Few can even imagine what $2 billion could buy, and that got us thinking…

What if boaters were donors? What could $2 billion buy in boating-related supplies? Here are our rough estimates.

13.3 million fishing rods

Fishing Rod

Continue reading “If Boaters Were Donors…”

What’s Happening This Month: A New Brochure from Manitou

That’s right, folks. Keep your eyes open for a new Manitou Pontoon Boats brochure that will be emerging very soon.

So, what’s so great about it?

“This year we concentrated on providing the customers with all the information they need on the boats while at the same time maintaining an artistically creative, visually appealing brochure that makes you want to head out on the water in a Manitou during a warm summer day,”  Greg VanWagenen, Manitou’s director of marketing and communications, said.

“High quality pictures, premium paper stock and expertly executed printing processes portray our boats as the high end premium brand that Manitou has become known for.”

In addition, he said they decided to go green with this brochure – it was printed with 100 percent wind power.

Here’s a preview of some of the great photos:

Continue reading “What’s Happening This Month: A New Brochure from Manitou”

ALL ABOUT PONTOON BOATS: FOUR QUESTIONS TO ASK BEFORE YOU BUY

This blog post is courtesy of SavvyBoater, which carries a wide selection of top-quality pontoon boat covers, bimini tops, boat seats, and fenders. The information has been updated as of 11/28/2017.

A pontoon boat is great for fishing, family outings, and parties. No longer looking as if they were built for your grandpa and his fishing buddies, today’s pontoon boats offer smooth rides and sleek finishes. The purchase of such a boat can be a significant recreational investment, but make sure you know all you can about pontoon boats before you buy. Use the following to help you make an informed decision:
Continue reading “ALL ABOUT PONTOON BOATS: FOUR QUESTIONS TO ASK BEFORE YOU BUY”

Pontoon Boat Cleaning Tips

The following post was written by our friend Bryan Hermann from EzFender, who shared these steps for tube polishing and protecting on the Pontoon Forums website. It was so detailed, we figured we’d share with our audience. Thanks, Bryan!

For those who are interested in polishing and protecting the tubes on your pontoon boat, here is a list of materials and step-by-step process to make your tubes shine like a mirror.

Start out by getting the right tools and supplies.

I bought 2 quarts of Sharkhide Protectant, 2 quarts of Cleaner and 1 can of Polish. This ended up being more than enough to do 2 boats, actually.

I used my 8″ 3000 to 8000 RPM Sander/ Polisher and 5 buffing pads.

Other materials:

  • 1 gallon of lacquer thinner
  • About 2 dozen old cotton rags and 1 roll of paper towels
  • 600 and 1000 grit wet/dry sandpaper to sand out scratches
  • 1 brass chisel and a small dead blow hammer to knock of welding slag
  • Masking tape, I used 2″ wide
  • Plastic to cover the trailer

Preparing to clean scuffed pontoons
1. Start out by removing any prior protectant by washing the pontoons off with lacquer thinner poured into a rag. If any protectant is on, you’ll see it dissolve. Get it all off, or the cleaner won’t attack the aluminum, which is what you want it to do.

2. Next, when drying off the pontoon, you can feel any slag which was splattered on the pontoon during the welding process. Remove this with a soft tap on a chisel with a hammer. I could even just use my hand in most cases. Wet sand the rest off, as well as any scratches you want to remove. In my case, it was the bad scratches down the center of my pontoons from the previous owner’s docking technique. I don’t think he had one!

3. Dry again. Then tape off all areas you are not going to treat, and cover the trailer with plastic sheeting to protect them from the acid and polishing compound.

4. Get ready to clean! Dilute the Sharkhide cleaner to strength needed. I diluted mine 3 parts water to 1 part cleaner in a garden sprayer or spray bottle. Spray on the cleaner evenly and let it foam up. After about 3 minutes of working time, I rinsed it off with water. This left behind a nice white finish that will let the polishing compound do its job more easily.

5. Polish time! Working in about a 3 foot section, I started with the polish at the top of the pontoon and worked my way down in an “S” shape to the masking tape line at the trailer bunk. Clean excess compound from the pad when it builds up and starts to bite hard. Add more compound to the pontoon when it seems like it doesn’t bite anymore. You want it to bite into the aluminum to work properly. Clean the pontoon with lacquer thinner as you finish up each section. Go to the next section and repeat all the steps until you are done with that pontoon.

6. After the polishing is complete, wash the pontoon off with lacquer thinner to remove all residue left from the compound. Make sure you remove it all. Use white rags or paper towels and clean until you have no more black residue on the rags. If the tube is not completely free of residue, the protectant will not stick to the aluminum.

7. After you are done, it’s time to apply the protectant. It doesn’t take much! Use a clean rag and fold it to the size of your palm. Pour a little protectant to the front of the rag and wipe it on the tube in 6 foot sections. I found that working in a right to left motion from top to bottom worked the best for me. I did miss a few small spots, but after the first coat cures, in about 24 to 36 hours, you can apply the 2nd coat and can catch all the spots you missed. Don’t try to apply to missed spots when it’s still wet; it will dissolve the first application and look splotchy. After the second coat is on, you can either stop there or apply a third coat.

Aluminum pontoons so clean, they become a mirror
That’s it! Pontoons that shine like a mirror.

If you have any questions or comments, contact Bryan at sales@ezfender.com.

A Little Something For Our Pontoon Loving Friends With Blogs/Websites Of Their Own

Love that pontoon of yours?

We know many of you out there maintain a blog or website of your own and often times you like to share stories about your fishing or water sports adventures on your Manitou Pontoon. So if you fall into this category, we figured we’d give you a couple of cool badges you can share on your blog or website, or even on Facebook or Pinterest if you’re so inclined. Like what you see? Just copy and paste the code into your html editor to add it to your own site!

Copy this code to add this to your own site:

 

Copy this code to add this to your own site:

 

Copy this code to add this to your own site:

 

Copy this code to add this to your own site:

The Evolution Of Manitou Pontoons

There have been many changes to our pontoons, and pontoons in general since we first began building pontoons more than 25 years ago. The graphic below lays out some of the more significant changes to various Manitou models over the years. Feel free to share this with your friends or share your thoughts in the comments below.

evolution of manitou pontoon boats

Embed

Just copy and paste the code below into your html editor to add this to your site.